Tandberg安装方法有如下两种方法:
1.方法1:设置默认磁带机设备
在安装磁带机时有一项改变磁带机设备,将磁带机设备设置为SCSI磁带机即可。方法如下:
(1)在超级用户下,键入命令"#mkdev tape",并回车。
(2)屏幕显示:
Tape Driver Configuation Program
1.Install a Tape Driver
2.Remove a Tape Driver
3.Change default Tape Driver
Select an option or enter q to quit:
键入3,并回车,屏幕显示:
1.Cartridge Tape Drive
2.Mini-Cartridge Tape Drive
3.QIC-40 or qic-80 Tape Drive
4.SCSI Tape Drive
Please select which tape drive you would like to have linked to default dev iceor enter q to return to the main menu:
键入4,并回车,屏幕显示:
Default SCSI Tape Drive Updated Menu
1.SCSI Tape Drive(Cartridge,Exabyte,9-Track,DAT)
2.Compaq SCSI Tape Drive
Please select which tape drive you would link to have linked to default dev ice or enter q to return to the main menu;
键入1,并回车,屏幕显示:
Default special device have been created with the following links:
/dev/xcto linked to /dev/xStp0/dev/rct0 linked to/dev/rStp0 and /dev/rmt/ob …… Enter new string,"rm"to remove string, or enter to leave current stringa s is:
键入q,并回车,屏幕回到初始信息,键入q,并回车,回到超级用户下,至此就可以用TAR命 令读/写磁带。
2.方法2,具体步骤如下:
(1)在超级用户下,键入命令"#mkdev tape",并回车。
(2)屏幕显示:
Tape Driver Configuration Program
1.Install a Tape Driver
2.Remove a Tape Driver
3.Change default Tape Driver
Select a option or enter q to quit:
1.Install Cartridge Tape Driver
2.Install Mini-Cartridge Tape Driver
3.Install Qic-40/Qic-80 Tape Driver
4.Install SCSI Tape Driver
Select an option or enter q to return to main menu:
键入4,并回车,屏幕显示:
SCSI Tape Drive Installation Menu:
SCSI Tape Drive Installation Menu:
1.Install SCSI Cartridge Tape Driver
2.Install Exabyte Tape Driver
3.Install SCSI 9-Track Tape Driver
4.Install SCSI DAT Tape Driver
5.Install Compaq SCSI Tape Driver
Select an option or enter q to return to main menu:
键入1,并回车,屏幕显示:
The SCSI Cartridge Tape Drive must be configured before use:
Do you wish to configured the SCSI Cartridge tape Drive now?(y/n):
键入y,并回车,屏幕显示:
Enter the prefix of the SCSI host adapter that supports this device or pres s＜Return＞for the default:"arad"Enter h for a list of host adadpter or enter q t o quit:
回车取默认值,屏幕显示:
Which"arad"SCSI host adapter supports this device?
Select 0～2,or enter q to quit:
键入0,并回车,屏幕显示:
What is the Target ID for this device?
Select 0～7,or h for help,or q to quit:
根据开机时显示SCSI各种设备时显示的ID号题入,开机时显示TANDBERG磁带机ID号为2, 故键入2,并回车,屏幕显示:
Host Adapter Type Device Adapter Number ID LUN
arad Stp 0 2 0
Update SCSI Configuration?(y/n)
键入y,并回车,屏幕显示:
Default special device have been created with the following links:
/dev/xct0 linked to /dev/xStp0
/dev/rct0 linked to/dev/rStp0 and/dev/rmt/0b…Enter new string,"rm"to remov e string,or enter q to leave current string as is:键入q,并回车,显示原来刚开始的 信息,键入q,并回车,接着显示:
You must creat a new kernel to effect the change you specified.Do you wisht o creat a new kernel now?(y/n)键入y并回车,下面提示新建的内核是否作为 默认引导内 核,键入y,下面提示设置内核环境,键入y,重新启动,如配置无显示错误,再用TAR命令执行无 误,至此安装成功。如有错,则查看卡参数是否与安装时输入的参数一致,卡是否插紧,电缆线 是否接的对,电源是否接上,再看是否与系统其它设备发生冲突,再用"#mkdev tape"命令直至 无误。 |
